
127
XMEGA A [MANUAL]
8077I–AVR–11/2012
Figure 12-2. Interrupt execution of a multi cycle instruction.
If an interrupt occurs when the device is in sleep mode, the interrupt execution response time is increased by five clock
cycles. In addition, the response time is increased by the start-up time from the selected sleep mode.
A return from an interrupt handling routine takes four to five clock cycles, depending on the size of the program counter.
During these clock cycles, the program counter is popped from the stack and the stack pointer is incremented.
12.5
Interrupt Level
The interrupt level is independently selected for each interrupt source. For any interrupt request, the PMIC also receives
the interrupt level for the interrupt. The interrupt levels and their corresponding bit values for the interrupt level
configuration of all interrupts is shown in
Table 12-1.